Products > Sample processing > Sample mills

Milomat


The compact lab mill Milomat.

The compact lab mill Milomat.


The milling chamber consists of metal bolts, which break the sample by high turning speed.

The milling chamber consists of metal bolts, which break the sample by high turning speed.

Perfect adaption to the instruments HE 60/ HE 90

  • Suitable for all types of cereals
  • Sturdy and maintenance-free
  • Easy to use

Application

The impact crusher Milomat is suitable for the grinding of different kinds of cereals, maize, grain, rape and sunflower seeds as well as peas and beans. Even dry and tough samples can be grinded without difficulties.

Adaption to HE 60/ HE 90

The mill is especially adapted to prepare samples for the moisture determination by means of the instruments of the HOH-EXPRESS series. The degree of fineness of the grinded sample meets perfectly the requirements for these instruments. The Milomat avoids heatings and airflows during the grinding process and due to this the moisture content of the sample remains unchanged.

Operation

The lower part of the measurement cell is placed under the discharging nozzle of the Milomat. Then the nozzle is pulled down. The sample is filled into the measure and it is then given into the feeder. The Milomat is switched on and then it is started. The sample is poured into the grinding chamber by pressing the dosing device. The grinded sample falls directly into the lower part of the measurement cell. The motor brake is activated and the discharging nozzle is pulled upwards. Then the upper part of the measurement cell is screwed onto the lower part, which was mounted to the moisture meter before. Then the measurement is carried out.

 

Technical data

mains supply 230 V* / 50 Hz*
Power consumption 360 VA
dimensions 330 x 165 x 235 mm
weight 8,5 kg
grinding capacity about 3 g/s

*other voltages on request!

Do you have further questions regarding Milomat?

» Send an enquiry