Model 32
model 32 divider
check of dividing copper concentrate
dividing samples into 32 sub-samples
Purpose
Dividing samples of grain, seed and other granular products. Accurately dividing to 32 fractions.
Function description
The sample to be divided is poured through a hopper in the top of the divider. From the hopper the sample material glides through a rotating tube which passes eight segments leading the sample to outlet tubes. The samples consists of a certain number of sub samples, the number of sub samples can be calculated by the number of rotations of the rotating tube (40 rpm). The accuracy of the dividing depends on the number of sub samples. To obtain the greatest accuracy, the time taken for dividing must never be less than 36s. With samples of less than 4 kg it is necessary to use an inlet hopper with a smaller outlet hole.
Typical use
The model 32 divider is used for homogeneous ring test samples or generating calibration samples for frequent internal checks of equipment.
Technical Specification Model 32
|
outlets |
32 |
|
No of samples |
32 |
|
Material |
Ratio |
|
Rape |
1:32 |
|
Grain |
1:32 |
|
Peas |
1:32 |
|
Flour |
non applicable |
|
Height |
530 mm |
|
Width |
470 mm |
|
Depth |
490 mm |
|
Weight |
65kg |
Specification
Surface treatment epoxy painted or electro galvanised.
Motor 60 W, 230 V, 50 Hz.
Additional equipment (options):
Automatic control panel
Vibration feeder for samples < 1 kg.
Hoppers no 3,6 and 9.
Extension hopper 8 kg.