Model 8
The model 8 divider for 8 samples
The rotating tube passes the eight segments with 40 rpm
Model 8 divider with buckets for sample collection
dividing samples into 8 sub-samples
Purpose
Dividing samples of grain, seed and other granular products. Accurately dividing to eight fractions.
Function description
The sample to be divided is poured through a hopper in the top of the divider. From the hopper the sample material glides through a rotating tube which passes eight segments leading the sample to outlet tubes. The samples consists of a certain number of sub samples, the number of sub samples can be calculated by the number of rotations of the rotating tube (40 rpm). The accuracy of the dividing depends on the number of sub samples. To obtain the greatest accuracy, the time taken for dividing must never be less than 20 sec. With samples of less than 4 kg it is necessary to use an inlet hopper with a smaller outlet hole.
Typical use
The model 8 divider is used for homogeneous ring test samples or generating calibration samples for frequent internal checks of equipment.
Technical Specification Model 8
|
outlets |
8 |
|
No of samples |
8 |
|
Material |
Ratio |
|
Rape |
1:8 |
|
Grain |
1:8 |
|
Peas |
1:8 |
|
Flour |
non applicable |
|
Height |
695 mm |
|
Width |
540 mm |
|
Depth |
540 mm |
|
Weight |
65kg |
Specification
Surface treatment epoxy painted or electro galvanised.
Motor 60 W, 230 V, 50 Hz.
Additional equipment (options):
Automatic control panel
Vibration feeder for samples < 1 kg.
Hoppers no 3,6 and 9.
Extension hopper 8 kg.
Transport system for transport of surplus sample.